Digital Flow Meter

Product Details:

Prominent supplier of Electro Magnetic Flow Meter catering to various industries and applications. Paper and pulp prominent supplier of electro magnetic flow meter catering to various industries and applications.

Salient features:-

• Based on faraday’s law of electromagnetic induction
• Suitable for pipe sizes of diameters 10 mm to 600 mm
• Coil assembly in hermetically sealed welded construction
• Choice of ptfe / neoprene rubber / polyurethane liners
• Integral or remote transmitter
• Field interchangeable electronics
• Optional led display for flow rate or totaliser indication in engineering units.
• No pressure loss
• Absolute zero stability and noise elimination.
• Measurement independent of liquid properties.
• Display of flow rate directly in user specified engineering units
• Negligible pressure loss
• Maintenance free design due to absence of any moving parts
• High linearity due to characteristic magnetic field

Applications:

• Water supply networks
• Chemical, petrochemical and process industries
• Pharmaceutical industries
• Waste – water management
• Sugar, food , drug and beverages industries
• Effluent treatment plants
• Fertilizer industries
• Beverage industries

 

Product Details:

Measuring your Liquid Flow

Introduction:- 

“TORQUE” make series 6400 ( Full Bore Type ) are new range of Bipolar Pulsed DC Full Bore type Electromagnetic Flow meters. It is suitable for pipes with nominal diameters of DN 10 to DN 600 . They are based on faraday’s law of Electromagnetic Induction. The Series 6400 meters features flanged construction and is available with choice of liner and Electrode materials. Series 6400 has excellent accuracy and flow range ability. The meter is suitable for use on wide range of corrosive and aggressive range of conductive liquids.

 

Salient Features:-

• Based on faraday’s law of Electromagnetic Induction
• Suitable for pipe sizes of diameters 10 mm to 600mm
• Coil Assembly in hermetically sealed welded construction
• Choice of PTFE / Neoprene rubber / Polyurethane liners
• Integral orremote transmitter
• Field Interchangeable electronics
• Optional LED display for flow rate or Totaliser indication in engineering units.
• No pressure loss
• Absolute zero stability and noise elimination.
• Measurement independent of liquid properties.
• Display of flow rate directly in user specified engineering units
• Negligible pressure loss
• Main Measuring your Liquid Flow

   

Product Details:

We are leading manufacturer and supplier of Ultrasonic Flow Meter. Ultrasonic Flow Meter have been used in industry for over a long period of time for the volume metric flow metering of liquids.

The TUF - 2000H Handled Clamp-on Ultrasonic flow meter is of the most powerful flow meters available for liquidmeasurement Utilization of our proprietary Ultrasonic Transit-Time measurement and signal quality tracking technologies allow accurate flow measurement of the liquid flow rate from outside of a pipe. The TUF - 2000H flow meters carefully designed so that it is very compact and easy to use. A user can use one hand to hold as well as operate the flow meter main unit. The user interface is self explanatory and very easy to follow. Besides, the unique clamp on fixture design makes he non-intrusive nature of the clamp on technique, there is no pressure drop no moving parts, no leaks and no contamination.

Range : DN 15 MM-DN 4500 MM

APPLICATION:- 

• The TUF-2000H Flow meter is ideal for flow surveys and closed pipe applications    where non-invasive measurement of liquids is required. Benefited from our advanced    digital signal processing technology, the handled flow meter works reliably in both    clean and opaque liquid flow. Examples of applications include : • Power plants (nuclear power plants, thermal & hydropower plants) heat energy    boiler feed water. • Energy consumption supervision and water conservation management. • Metallurgy and mining application (e.g acid recovery) • Marine operation and maintenance, pulp and paper. • Pipeline leak detection, inspection, tracking and collection. • Water, including hot water, chilled water, city water, sea water etc. • Sewage and drainage water with small particle quontity. • Oil, including crude oil, lubricating oil, diesel oil, fuel oil, etc • Chemicals, including alcohol, acids, etc, solvents, Beverage and food processes. • HVAC hot and cool water, water / glycol solutions, water and waste treatment.

Additional Information:

• Port of Dispatch: ahmedabad
• Production Capacity: 5
• Delivery Time: 1
• Packaging Details: export worthy

Product Details:

"Torque" series 6500 is a new range of bipolar pulsed dc Insertion Type Electromagnetic Flow Meter
it is suitable for pipes with nominal diameters of 100 mm & above. The flow meter is based faraday's law of electromagnetic induction. Series 6500 excellent accuracy and flow range ability within its class. The meter is suitable for use on wide range of corrosive and aggressive range of conductive liquids.

Application: -

• Water supply networks
• Chemical and process industries
• Pharmaceutical industry
• Waste - water management
• Sugar, food and beverages industries
• Effluent treatment plants

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit)

Product Details:

APPLICATION:

• Water Supply Networks, Chemical, Petrochemical and Process Industries (Only Conductive Liquids)

• Pharmaceutical Industries / Paper and pulp Industries / Fertilizer Industries / Beverage Industries

• Waste - Water management , Sugar, Food, Drug and Beverages Industries

 

• Effluent Treatment Plants, Aluminum, Steel, Mining and Dredging Industries


SPECIFICATION:

• Suitable for pipe sizes : DN 10 to DN 2000

• Media Conductivity (Min) : 10 us / cm (Consult factory for 5 us/cm)

• Media Pressure : PN 40 up to DN 80, PN 16 upto DN 200 & PN 10 up to DN 600

• Media Temperature (PTFE) : 0"-180c with remote transmitter

  0"-120c with integral transmitter

  0"-90c max for other Liners

• Material : SS 316 (Non - Magnetic)

• Liner : PTFE / Neoprene / Polyurethane

• Electrode : SS / Hostelloy C / Ta / Ti / PL

• End Connection / Flanges : Carbon steel / SS 304 / SS 316 / SS 316L

• Coil Housing : Carbon steel / SS, Epoxy painted

• Transmitter : Cast aluminum (Lm6), Epoxy painted

• Power supply : 110 / 240 V AC + 15 % 50 Hz

• Power consumption : 20 VA

• Analog Output : 4-20 mA / DC / 0-20 mA DC

• Communication port (Optional) : RS -23 / RS - 485 MODBUS RTU protocol

• Response time : 5 second

• Flow velocity Range : 0.3 to 10 m/s

• Ingresss Protection : IP - 65 (IP 68 on request)

• LED Display : 4 Digit Indication for flow rate and 8 digit indication for Totaliser programming

from keyboard for engineering unit

Accuracy : 0.5 % of measured value (calibrated) at

eference conditions

• Accuracy : 2 % of span

• For flow Between 0 to 100 % : Refer Error Diagram

• Reference Conditions

• Power Supply : Nominal

• Ambient Temperature : 25 + 2c

• Load Resistance : 500

• Repeatability : + 0.2% of span

• Effect of Ambient Temperature : Less then 0.2% per 10c

• Effect of power supply : Less then 0.1% per

• 10% Voltage Variation

• Effect of Load Resistance Less than 0.1% of span

Product Details:

Turbine Flow Meter transducer adapts to measure the liquid rate and total flow rate of low viscosity and for clear liquid. It can be widely used in the fields of petrol, chemical Industry Metallurgy , Scientific research for measuring or control. Several output display methods can be selected.


APPLICATION:-

The standard turbine meter is suitable for custody transfer gas measurement of all non-corrosive gases such as natural gas, propane, butane, air, nitrogen, hydrogen, etc. for low and high operating pressures. Special constructions can be supplied for use under extreme condition like high temperatures or corrosive gases.We can modify to perform as a master meter or transfer master meter.

Product Details:

Oval Gear Meter is a kind of positive displacement meter to measure the liquid flow or instantaneous flow of the pipe tube. It is a kind of accumulate meter. With characteristics of high accuracy, small change by the fluid viscosity, it is widely used to measure oil kind liquid, but it is forbidden to measure corrosive liquid.

Salient features:

• Integral or remote transmitter
• Field interchangeable electronics
• Optional led display for flow rate or totaliser indication in engineering units.
• No pressure loss
• Absolute zero stability and noise elimination.
• Measurement independent of liquid properties.

Product Details:

We are offering of Vortex Flow Meter.

Principal

• A Columnar object is inserted into the fluid. Regular eddies occur alternately on both sides of the columnar object. This kind of eddy is called as Kaman vortex. The occurrence frequency is proportional to the flow velocity of liquid, so the vortex frequency is detected by piezoelectric sensor, and the flow rate of fluid may be calculated through the sensor.

Advantages:-

• Temperature and pressure compensation transmitter receive temperature sensor signal and pressure sensor signal and displays the flow rate of fluid after temperature and pressure compensation , and then the temperature compensation and pressure compensation are realized.
• Explosion Proof : Exia II CT6 Exd II CT6
• Output : 4-20 m A / pulse signal
• Display : LCD Instantaneous flow, accumulated flow of measured medium simultaneously.
• Communication :- HART ( on request only) , Profibus – DP FF/fieldbus
• No Moving Components, firm, durable and maintenance-free.

Product Details:

Cast Iron Oval Gear meter has the ability to handle a wide range of fluid viscosities with exceptional levels of repeatability and durability , applying in the petroleum , chemical , food Industry etc. We are pleased to introduce our new “TORQUE” make positive displacement flow meters For oil, diesel, petrol, kerosene or any slightly viscous non corrosive liquids; this is reset type, Mechanical flow meters.

Applications: 

 

• Oval gear flow meter is a kind of positive displacement meter to Measure the liquid flow or instantaneous flow of the pipe tube. it is a Kind of accumulate meter. with characteristics of high accuracy, small change by the fluid Viscosity, it is widely used to measure oil kind liquid, but it is forbidden to measure corrosive Liquid

 

Specifications:

• Compact size ,
• Easy maintenance
• Easy to read and operate mechanical display
• Flexibility of Installation Options.
• 3" & 4" size available
• Low Pressure drop

Product Details:

Orifice Plate Flow Meter is used for flow rate measuring in pipe systems. With orifice plate, pressure drop is created. Based on the magnitude of pressure drop, flow rate can be calculated. Orifice plate calculator can be used for both liquids and gases. Fluid is considered as in- compressible, so density (rho) and temperature (T) are constant through tube. Also, gas is considered as ideal.

• Suitable for liquids, gases and steam applications in line sizes from DN15 to DN200 and at pressures up to 100 bar, it combines all the major components needed for an orifice plate installation in one assembly. This eliminates the need for users to design, source and in- stall a separate manifold, transmitter and impulse piping, typically cutting the cost of installation and commissioning.
• The all-in-one design also offers enhanced accuracy and a faster speed of response,with no problems caused by issues such as long or blocked impulse lines, or impaired signals due to condensation in gas system impulse lines or gas bubbles in liquid lines.
• The Compact Orifice Flow meter Series is designed for closed loop control and general purpose monitoring applications. This design lowers the total installed cost of DP Flow measurement points eliminating the need for fittings, impulse tubing, valves, adapters and
• manifolds by providing a single device packaged together for simplified installation. By integrating p r e s s u r e transmitters with the Compact Orifice primary element, we deliver the highest performing Flow meters which arrive assembled, calibrated, pressure
• tested, and ready to install.