Custom Built Pump

Product Details:

A fire pump is a part of a fire sprinkler system's water supply and can be powered by electric, diesel or steam. The pump intake is either connected to the public underground water supply piping, or a static water source (e.g., tank, reservoir, lake). The pump provides water flow at a higher pressure to the sprinkler system risers and hose standpipes. A fire pump is tested and listed for its use specifically for fire service (by a third‐party testing and listing agency if required)

APPLICATION:- 
• Petroleum, Oil and gas,
• Refineries, various depots/terminals and Installation
• various offshore Installations.
• Hotels, Shopping and Housing complexes all over the country.
• Commercial Complexes
• High rise Buildings
• Airports and ports
• Oil and Gas on shore and off shore platforms
• Power stations and transformer stations
• Petroleum and petrochemical complexes
• Warehouses
• Manufacturing and Chemical Industry

Additional Information:

• Port of Dispatch: ahmedabad
• Packaging Details: export worthy

Product Details:

A Fire Fighting Vertical Multistage Pump is a part of a fire sprinkler system''s water supply and can be powered by electric, diesel or steam. The pump intake is either connected to the public underground water supply piping, or a static water source (e.G., tank, reservoir, lake). The pump provides water flow at a higher pressure to the sprinkler system risers and hose standpipes. A fire pump is tested and listed for its use specifically for fire service (by a third-party testing and listing agency if required)

Operation:-

• Fire pumps may be powered either by an electric motor or a diesel engine, or, occasionally a steam turbine. If the local building code requires power independent of the local electric power grid, a pump using an electric motor may utilize, when connected via a listed transfer switch, the installation of an emergency generator.
• The fire pump starts when the pressure in the fire sprinkler system drops below a threshold. The sprinkler system pressure drops significantly when one or more fire sprinklers are exposed to heat above their design temperature, and opens, releasing water. Alternately, other fire hoses reels or other firefighting connections are opened, causing a pressure drop in the fire fighting main.
• Fire pumps are needed when the local municipal water system cannot provide sufficient pressure to meet the hydraulic design requirements of the fire sprinkler system. This usually occurs if the building is very tall, such as in high-rise buildings, or in systems that require a relatively high terminal pressure at the fire sprinkler in order to provide a large volume of water, such as in storage warehouses. Fire pumps are also needed if fire protection water supply is provided from a ground level water storage tank.
• Types of pumps used for fire service include: horizontal split case, vertical split case, vertical inline, vertical turbine, and end suction.

Product Details:

Floating pump in river:-

• These special type of pumps have been designed to float in rivers and lakes and sump where level of liquid changing constantly and sometimes liquid required positive suction or low suction. Following are the special features of the pumps.
• Takes both axial and radial loads, specially designed to take thrust loads due to high currents in rivers.
• The centre of gravity is maintained in such a way that the pump will always be in position and even if some heavy logs/animals / external forces in the river try to change its position the pump tends to come to its original floating position when the external lateral force is removed.
• Very easy to maintain: lots of power/energy savings as compared to high suction pumps.
• Pump and floating platform can be made from m.S, pp or ss as per requirement.
• By reason that the floating pump can run in the water , such pumps are helpful for simplifying the earth work and building engineering of pumping station , reducing installation area and saving 30~40% of the total project cost.
• Can solve the flood resistance problem of those rivers and lakes with large fluctuation of water levels.
• Can be supplied up to 200 meter head and 1000 m3/hr
• Floating pumps avoid the need for any civil construction on the river banks.
• Floating pumps are not affected by the fluctuations of the water (tide) levels. Since the pump is always floating, it ensures that the impeller remains submerged. When pump is under water or very low suction head due to floating platform in surface pump.
• Since these pumps are floating , the issue of depth of suction is ruled out.
• Very useful when suction lift is very high.
• Very useful for slurry , hot water and for mini

Additional Information:

• Production Capacity: 900 LTR/MIN

Manufacturer & Exporter of Massecuite Pump. Our product range also comprises of Centrifugal Pump and Sanitary Pump.

 

Features:

• More than 3mm corrosion allowance (Cast Iron) for extended use on corrosive applications.
• Back pull out construction allows rotating assembly to be withdrawn without disturbing the suction and delivery connections.
• One piece self vented foot mounted , center suction volute casing , single stage , closed / semi open dynamically balanced Impeller.
• Flange drilling standards as per DIN 24255 / ISO 2858 or as per Customer’s Requirement.
• Designed for 16 bar working pressure with optional casing for a working pressure of up to 20 bar.
• A robust and solid construction that guarantees long life even under high suction pressure conditions.
• Heavy –Duty, Deep- Grooved bearings with Minimum 50,000 hours operating life under normal condition. (Grease lubricated , Oil lubrication available on request)
• Heavy –Duty , Stiff solid shaft design with low L3/D4 ratio ensures less than 0.05 mm shaft deflection at the seal face in all operating condition. This extends the seal life.
• Seal housing is constructed to accommodate different seal / gland designs, so as to meet the severe heavy-duty requirements. (Standard is gland packing , seal version on special request)
• Excellent parts interchangeability reduces inventory levels for spare parts to a minimum.
• Special design for high temperature thermic fluid available on request.
• Motor or Engine driven sets.
• Special Monoblock versions available on request.

Specifications:

• MATERIAL OF CONSTRUCTION : Cast Iron Construction with En-8 Shaft , SS-410 Sleeve, Gland Packing and special material like WCB , CF-8 , CF-8M, Alloy 20 , SS-304 , SS-316 Fabricated etc on request

Applications:

• For pumping Clear / Turbid water / Chemicals & Volatile Liquids.
• Air conditional plants , power station , Mine Drainage ,
• Sprinkle systems fire fighting , Booster service , Oils Brine.

Product Details:

Applications :

• “PS” type pumps are used in sugar industry. Sea water desalination plants, power stations, steel plants and absorption plants in environmental engineering & etc.
• Handling of all types of clear non aggressive liquids, turbid or slightly contaminated liquids , raw water , sewage water , sea water , low concentration cellulose suspension & etc.

Operating range :-