Centrifugal Pump

These pumps are stainless steel centrifugal monoblock and bare pumps(coupled). These pumps are made from ss-304 or ss-316 sheet. The pumps are precisely fabricated. These pumps wetted parts are of stainless steel and widely used in chemical and process industries. As these pumps are fabricated from steel, it is also widely used in dairy, food and beverages industries, wine , RO and DM plant ,sea water applications. These pumps are available from 0.25 HP to 30 HP . head up to 90 meter and capacity up to 3000 LPM. The unique feature is international quality at affordable price with minimum delivery period.

Horizontal Multistage Centrifugal Pump

  • Foil Print

₹ 135000/Piece Get Latest Price

Product Brochure
Motor Horsepower40 HP
StagesMulti-Stage
Motor PhaseThree Phase
MaterialCast Iron
Application/UsageFor Water Treatment Plants
Product TypeHORIZONTAL HIGH PRESSURE MULTISTAGE CENTRIFUGAL PUMP
Pump TypeCHP-53-11 2900RPM 40HP BARE PUMP
BrandMALHAR

Minimum order quantity: 1 Piece

We are offering of HORIZONTAL HIGH PRESSURE MULTISTAGE CENTRIFUGAL PUMP

Applications and Industries:

Irrigation – Sprinkler Installations• Water Supply• Pressure Boosting – Multi stories buildings,Hydro – Pneumatic• Water Works Fire Fighting – Mining wash down Applications• Hydraulic press / Circuits transfer & circulation hot & cold water• Boiler feed pumps – Condensate pumps

OPERATING RANGE  :-
• Capacity : 2500 LPM Maximum• Head : 400 Mtrs Maximum• Size : 1" to 6"• Temperature : 140°c Maximum

SS Pharmaceutical Pump

  • Foil Print

₹ 9800/Piece Get Latest Price

Product Brochure
BrandMALHAR
Head5-10 m
Usage/ApplicationIndustrial
MaterialStainless Steel
Power Sourceelectric

Minimum order quantity: 1 Piece

We are the suppliers of Pharmaceutical Pumps.

Applications :


  • Milk, Cream, Butter Milk Condensed Milk.
  • Fruit Juice, Beer, Wine, Sugar Syrup.
  • Vitamin Solutions, Sugar & Confectionery.
  • R O Water, DM water, Pure Water
    Water for Injection (WFI).
  • Vegetable Oil, Mineral Oil, Lub Oil etc.
  • Pharmaceutical Formulations, Syrup etc.
  • Alkaline Solutions / Alcoholic Drinks.
  • Acids, Fine Chemicals.
  • Bottling Plants, Soft Drinks & Distillery.
  • Food Processing / Liquid Food Stuffs
  • Water Treatment Plats.
  • Colour dyes and Pigments / Paints.
  • Descaling Applications, Paper & Cement Industries.

 

Features :

 

  • As all pumps are made from rolled stainless steel, mechanical properties are far superior then cast material.
  • Pore free, non-pitting and non-adhering smoother surface, so less friction losses, and less crevice corrosion.
  • Super finish surface also ensure no ingress or emission of germs or impurities
    during pumping or idling which is basic requirement of sterlie / hygienic application.
  • Designed for CIP (clean in place) or manual cleaning.
  • Pumps are highly energy efficient and requires less NPSH to function without cavitation.
  • Suitable for standard motor or flange type or foot cam flange type motor or engine.
  • Monobloc or bare pumps or with trolley.
  • Also with flame proof motors.
  • Various types of connection like - tri'clove joints SMS, Flanges or threaded nipple/coupling.
  • Pumps with adjustable legs, available in requests.

 

 

Technical Specifications :

 

CasingAISI 316 / 316L / 304 L / 304
ImpellerAISI 316 / 316L / 304 L / 304
Wear plateAISI 316 / 316L / 304 L / 304
ShaftAISI 316 / 316L / 304 L / 304
SealTC / TC, SIC / SIC, SS/Carbon
or even seal in special application
Motor CoverSS-304 /S202
GasketViton / Nitrile / Silicon / PTFE

Horizontal Centrifugal Monoblock Pump

₹ 12000/Unit Get Latest Price

Product Brochure
Motor Horsepower1 HP
ModelPP-3
Warranty (in months) 12 months
Type of end useIndustrial
Motor PhaseSingle Phase
Power SourceElectric
Material of Constructionpolypropylene
Installation & After Sales Service No
BrandMalhar

Minimum order quantity: 1 Unit

Features:

  • More than 3mm corrosion allowance (cast iron) for extended use on corrosive applications.
  • Back pull out construction allows rotating assembly to be withdrawn without disturbing the suction and delivery connections.
  • One piece self vented foot mounted , center suction volute casing , single stage , closed / semi open dynamically balanced impeller.
  • Flange drilling standards as per din 24255 / iso 2858 or as per customer’s requirement.
  • Designed for 16 bar working pressure with optional casing for a working pressure of up to 20 bar.
  • A robust and solid construction that guarantees long life even under high suction pressure conditions.
  • Heavy –duty, deep- grooved bearings with minimum 50,000 hours operating life under normal condition. (grease lubricated , oil lubrication available on request)
  • Heavy–duty , stiff solid shaft design with low l3/d4 ratio ensures less than 0.05 mm shaft deflection at the seal face in all operating condition. This extends the seal life.
  • Seal housing is constructed to accommodate different seal / gland designs, so as to meet the severe heavy-duty requirements. (standard is gland packing , seal version on special request)
  • Excellent parts interchangeability reduces inventory levels for spare parts to a minimum.
  • Special design for high temperature thermic fluid available on request.
  • Motor or engine driven sets.
  • Special monoblock versions available on request.

Material of construction :

  • Cast iron construction with en-8 shaft , ss-410 sleeve, gland packing and special material like wcb , cf-8 , cf-8m, alloy 20 , ss-304 , ss-316 fabricated etc on request

Applications:-

  • For pumping clear / turbid water / chemicals & volatile liquids.
  • Air conditional plants , power station , mine drainage ,
  • Sprinkle systems fire fighting , booster service , oils brine.

Centrifugal Monoblock Pump

  • Foil Print

₹ 11000/Unit Get Latest Price

Product Brochure
Motor Horsepower1 HP
MaterialStemless Steel
Model Name/NumberCF
Head150 meter
Capacity800 m3/h
Horsepower:1HP

Minimum order quantity: 1 Unit

We are a chief Manufacturer, Exporter and Importer of the premium quality Centrifugal Pumps. Our Centrifugal Pumps are stainless steel centrifugal monoblock and bare pumps (coupled). Centrifugal Pumps are made from ss-304 or ss-316 sheet. These are precisely fabricated. Its wetted parts are of stainless steel and are widely used in chemical and process industries. As these pumps are fabricated from steel, it is also widely used in dairy, food and beverages industries, wine, RO and DM plant, sea water applications.



Applications:



  • Milk, Cream, Butter Milk Condensed Milk
  • Fruit 3uice, , , Sugar Syrup
  • Vitamin Solutions, Sugar & Confectionery
  • R 0 Water, DM Water, Pure Water. Water for Injection (WFI)
  • Vegetable Oil, Mineral Oil, Lub Oil etc
  • Pharmaceutical Formulations, Syrup etc
  • Alkaline Solution / Alcoholic Drinks
  • Acids, Fine Chemicals
  • Bottling Plants, Soft Drinks & Distillery
  • Food Processing / Liquid Food Stuffs
  • Colour dyes and Pigments / Paints
  • Descaling Applications, Paper & Cement Industries
  • Water Treatment Plants
  • Detergent, Soaps, Paste & Shampoo
  • Textile Sizing, Dyeing & Finishing Systems

ACH Centrifugal Pump For Dirty Water

  • Foil Print

₹ 48000/Piece Get Latest Price

Product Brochure
MaterialCast Iron
Application/UsageFor Oil and Gas Industry
Power SourceElectric, Diesel
Type Of End UseIndustrial
Brand/makeCreative engineers
SpeedUp to 2900 rpm
CapacityUp to 600 M3/Hr

We are the suppliers of ACH Centrifugal Pump for Dirty Water.

APPLICATIONS :


  • “ACH” Type pumps are used in Chemical & Petrochemicals Industry, Food Industry, Dyeing , Sugar Industry, Paper & Pulp Industry, Fertilizer Units & Etc.
  • Handling of all types of Liquids , Acids , Alkalis , Dyes , Hydrocarbons , Corrosive Slurries (Solids Up to 15 mm) , Green , Black Liquor , Pulp (Consistency up to 2%) & Etc.

Technical Specifications :

Capacity

Up to 600 M3/Hr

Head

Up to 180 Mtrs (590 Feet)

Temperature

Up to 200° C (392° F)

Casing Pressure

Up to 24 Kg / cm2

Pump size ( Delivery bore)

DN 25 mm to DN 200 mm

Speed

Up to 2900 rpm

Direction of rotation

Clockwise from drive end

Horizontal Centrifugal Pump

₹ 30000/Unit Get Latest Price

Product Brochure
Max Flow Rate30-50 cube per hour
Headmax 200mtr
BrandMalhar
ModelCHP
Type of end useIndustrial
Power SourceDiesel, Electric
Cooling MethodWater Cooled

Minimum order quantity: 1 Unit

We are the leading manufacturers of Horizontal Centrifugal Pumps .

Features :-

  • Covers a range of capacities extending to 700 M.cu/hr. at 1450 rpm, and 300M.cu/hr_ at 2900 rpm.
  • Head range upto 145 mtrs
  • Pressures are 25 bars
  • Temperatures extend from -40°C to +300°C,


Materials:-

All parts that come into contact with the liquid are made up of cast iron, ductile iron, rubber lined, cast steel, bronze, Ni-Resist, Ni-Cast iron, Stainless steel, Alloy-20, R.52, R.53, R.55, Hastally-C, Hastally-B and other Alloy grades as per operating conditions.

Design features:
Our centrifugal process pumps are of single stage, horizontal end suction type, with semi open impellers. The semi open impellers are used / supplied where liquids, containing solids, or have a tendency to polymerize or crystallize. A special feature is easy of maintenance due to the foot mounted volute casing which permits removal of the rotating assembly without disturbance of pipe connections. From our end, an extensive choice of materials of construction is offered enabling a wide range of chemicals to be handled. The casing assembly is hydrostatically tested to a minimum of 1.5 times the shut-off pressure. Various additional non-destructive testing procedures are carried out as standard practice on all pump parts.

Centrifugal Pump

  • Foil Print

₹ 10300/Piece Get Latest Price

Product Brochure
Motor Horsepower0.5
StagesSingle Stage
Motor PhaseSingle Phase
MaterialStainless steel
Application/UsageFor Food and Beverage Industry
Pump TypeCENTRIFUGAL
BrandMALHAR
Model Name/NumberCF-2
Maximum Discharge Flow112LPM

Minimum order quantity: 1 Piece

We are Manufacturer and Exporter of the premium quality Centrifugal Pump. Our Centrifugal Pumps are stainless steel centrifugal monoblock and bare pumps (coupled). Centrifugal Pumps are made from ss-304 or ss-316 sheet. These are precisely fabricated. Its wetted parts are of stainless steel and are widely used in chemical and process industries. As these pumps are fabricated from steel, it is also widely used in dairy, food and beverages industries, win_e, RO and DM plant, sea water applications. These pumps are available from 0.25 HP to 30 HP. Our Centrifugal Pump head up to 90 meter and its capacity is up to 3000 LPM. Our Centrifugal Pump is of international quality at affordable price with minimum delivery period. We offer a wide assortment of Centrifugal Pump, which is extensively used in various engineering, fluid based and other industries for transporting of milk, juice, water, chemicals etc. It is fabricated using high grade stainless steel, these pumps are acknowledged for high durability and flexibility. Innovatively designed, these pumps ensure trouble free performance and energy efficiency.


Applications:

  • Milk, Cream, Butter Milk Condensed Milk
  • Fruit 3uice, , Sugar Syrup
  • Vitamin Solutions, Sugar & Confectionery
  • R 0 Water, DM Water, Pure Water. Water for Injection (WFI)
  • Vegetable Oil, Mineral Oil, Lub Oil etc
  • Pharmaceutical Formulations, Syrup etc
  • Alkaline Solution / Alcoholic Drinks
  • Acids, Fine Chemicals
  • Bottling Plants, Soft Drinks & Distillery
  • Food Processing / Liquid Food Stuffs
  • Colour dyes and Pigments / Paints
  • Descaling Applications, Paper & Cement Industries
  • Water Treatment Plants
  • Detergent, Soaps, Paste & Shampoo
  • Textile Sizing, Dyeing & Finishing Systems
  • Natural Cellulose Fiber / Synthetic Fiber System
  • Hot & Cold Water Pumping

RANGE:
   
     • Size : 12 MM TO 100 MM
     • Head : 03 Meters to 76 Meters
     • Capacity : Up to 1890 Lpm


MATERIAL OF CONSTRUCTION:

  • SS 304/ SS 316/ SS 304 L / SS 316 L
  • Seal silicon carbide Or as per customer's requirement.


Submersible Sewage Pump

  • Foil Print

₹ 15000/Piece Get Latest Price

Product Brochure
Power>10 HP
Head>50 Meter
Casing materialCI/MS
Solid SizeUp to 100 mm
Impeller TypeCast Iron / SS

Minimum order quantity: 1 Piece

Specifications:

  • Insulation Class-B
  • Protection IP-68
  • Continuous service S1 Duty
  • Thermal Protector for Single Phase
  • Max Liquid Temperature 35 Degree Celsius
  • Max Ambient Temperature 40 Degree Celsius

Material Of Construction :-

  • Pump Casing:- Cast Iorn
  • Impeller :- Cast Iron
  • Shaft :- Stainless steel
  • Motor Body :- Stainless steel (up to 3 hp) & Cast Iron (5.5 & 7.5 hp)
  • Seal Housing :- Cast Iron
  • Motor Cover :- Cast Iron

Submersible Sewage Water Pump

  • Foil Print

₹ 15000/Piece Get Latest Price

Product Brochure
Power10 HP
Usage/ApplicationSLUDGE
Max Flow Rate1800LPM
Head10 Meter
Outlet Diameter4" INCH
Solid Handling Capacity (mm)30MM
Pipe diameter4"
Solid Handling Capacity30MM

Minimum order quantity: 1 Piece

SEWAGE & DEWATERING SUBMERSIBLE PUMPS

APPLICATIONS:-

• Effluent with slurry and solids. • Dewatering man-hole sewers. • De- silting. • Storm/Flood water transfer. • Drainage of sewage from the building basements,    hotel industry, wastes water from factories. • Drainage of sewage from industrial process factories.    emptying of septic tanks, cesspits and sewage pump stations. • Pumping surface and drainage water from    garages and sprinkler systems. • Quick out installation • Cooling Jacket Arrangement, • Single phase pumps are provide with auto water • level control & Thermal Protection.

RANGE:-

• HP : UP To 200 HP • RPM : 3000 / 1500 / 1000 RPM • Size : UP To 12” • Head : Up to 90 Mtr. • Capacity : Up to 3000 lpm   (In High speed pump),   Up To 15,000 lpm          (In Low Speed pump) • Stage : One • Solid Size : Up to 100 mm • Concentration : Up to 30%

MATERIAL OF CONSTRUCTION:- 

• Motor Body : CI/SS, •Cooling Jacket : MS/ SS, •Casing : CI/MS, •Impeller : Cast Iron / SS, •Shaft : SS, •Hardware : SS , •Oil Chamber : CI Quick Out •Coupling : CI / SS •Strainer : SS with 6 or 10 mm round holes 

Mechanical Seal:- 

TC/TC or Silicon Carbide ,Bi Directional Twin Mechanical seal with various face combination Looking to the Application.Cable :PVC Insulated Double SheathedCopper Conductor flexible Cable






Rubber Lining Pump

₹ 65000/Piece Get Latest Price

Product Brochure
Motor PhaseThree Phase
MaterialCast Iron
Application/UsageFor Chemical Process & Pharmaceutical Industry
ModelRLP
BrandMalhar

Minimum order quantity: 1 Piece

FEATURES: 

Construction:- All wet parts coming in contact with liquid pumped are either lined on cast Iron or made appropriate corrosion resistance Non-Metalics.
Drive:- Pumps are mainly arranged from a coupling drive or V belt drive on request
Impeller:- Semi-Open type rubber lined Impeller handles maximum solid particles without load on pump's Efficiency.
Shaft:-  EN-9 OR SS 316.
Sleeve:- Alloy-20 , Ceramic , FRP.
Ball Bearing:-  Inboard bearing is pressed on shaft (En-9 / SS 316) and is free to float axially in frame which carries radial load only. Outboard bearing is shouldered red and locked on shaft with locknut and washer and in bearing housing to carry radial and any unbalanced thrust load. All bearing fits are precision bored.
Gland Packing:- Pumps are fitted with gland packing compatible with the liquid to be handled.

APPLICTION: 

• Hydraulic Acid at all Concentrations
• Dilute Sulphuric Acid
• Pigment Slurries
• Lime Slurry / Milk of Lime
• Phosphoric Acid Solutions
• Paper Stock
• Industrial effluents
• Ore Slurries
• Acidic Slurries
• Abrasive Slurries
• Sea Water

OPERATING RANGE: 

• 10 M /hr - 40 M /hr
• Head Up to 20 meters
• Liquid Column
(Higher Models Available on Request.)

Chemical Transfer Pump

  • Foil Print

₹ 12000/Piece Get Latest Price

Product Brochure
MaterialCAST IRON
Usage/ApplicationIndustrial
CapacityUPTO 990M3/HR
ColorBlue
Country of OriginMade in India

Minimum order quantity: 1 Piece

Features:

  • More than 3mm corrosion allowance (cast iron) for extended use on corrosive applications.
  • Back pull out construction allows rotating assembly to be withdrawn without disturbing the suction and delivery connections.
  • One piece self vented foot mounted , center suction volute casing , single stage , closed / semi open dynamically balanced impeller.
  • Flange drilling standards as per din 24255 / iso 2858 or as per customer’s requirement.
  • Designed for 16 bar working pressure with optional casing for a working pressure of up to 20 bar.
  • A robust and solid construction that guarantees long life even under high suction pressure conditions.
  • Heavy –duty, deep- grooved bearings with minimum 50,000 hours operating life under normal condition. (grease lubricated , oil lubrication available on request)
  • Heavy–duty , stiff solid shaft design with low l3/d4 ratio ensures less than 0.05 mm shaft deflection at the seal face in all operating condition. This extends the seal life.
  • Seal housing is constructed to accommodate different seal / gland designs, so as to meet the severe heavy-duty requirements. (standard is gland packing , seal version on special request)
  • Excellent parts interchangeability reduces inventory levels for spare parts to a minimum.
  • Special design for high temperature thermic fluid available on request.
  • Motor or engine driven sets.
  • Special monoblock versions available on request.

Material of construction :

  • Cast iron construction with en-8 shaft , ss-410 sleeve, gland packing and special material like wcb , cf-8 , cf-8m, alloy 20 , ss-304 , ss-316 fabricated etc on request

Applications:-

  • For pumping clear / turbid water / chemicals volatile liquids.
  • Air conditional plants , power station , mine drainage ,
  • Sprinkle systems fire fighting , booster service , oils brine.

Back Pull Out Bare Shaft Coupled Pump for Air Conditional PL

  • Foil Print

₹ 40000/Unit Get Latest Price

Product Brochure
Power1-5 HP
Head150 Meter
Motor PhaseThree Phase
Usage/ApplicationIndustrial
BrandCreative Engineers
MaterialCast Iron
Pressure16 - 20 bar

Minimum order quantity: 1 Unit

FEATURES :

· More than 3mm corrosion allowance (Cast Iron) for extended use on corrosive applications.

· Back pull out construction allows rotating assembly to be withdrawn without disturbing the suction and delivery connections.

· One piece self vented foot mounted , center suction volute casing , single stage , closed / semi open dynamically balanced Impeller.

· Flange drilling standards as per DIN 24255 / ISO 2858 or as per Customer’s Requirement.

· Designed for 16 bar working pressure with optional casing for a working pressure of up to 20 bar.

· A robust and solid construction that guarantees long life even under high suction pressure conditions.

· Heavy –Duty, Deep- Grooved bearings with Minimum 50,000 hours operating life under normal condition. (Grease lubricated , Oil lubrication available on request)

· Heavy –Duty , Stiff solid shaft design with low L3/D4 ratio ensures less than 0.05 mm shaft deflection at the seal face in all operating condition. This extends the seal life.

· Seal housing is constructed to accommodate different seal / gland designs, so as to meet the severe heavy-duty requirements. (Standard is gland packing , seal version on special request)

· Excellent parts interchangeability reduces inventory levels for spare parts to a minimum.

· Special design for high temperature thermic fluid available on request.

· Motor or Engine driven sets.

· Special Monoblock versions available on request.

 

MATERIAL OF CONSTRUCTION :

Cast Iron Construction with En-8 Shaft , SS-410 Sleeve, Gland Packing and special material like WCB , CF-8 , CF-8M, Alloy 20 , SS-304 , SS-316 Fabricated etc on request

 

APPLICATIONS:-

For pumping Clear / Turbid water / Chemicals & Volatile Liquids.

Air conditional plants , power station , Mine Drainage ,

Sprinkle systems fire fighting , Booster service , Oils Brine.

Radial Flow Centrifugal Pump

  • Foil Print

₹ 32000/Unit Get Latest Price

Product Brochure
BrandMalhar
Motor Horsepower3 HP, 6.5 HP, 0.5 HP, 1 HP, 2 HP, 5 HP
HeadUp to 88 Meter
Motor PhaseThree Phase, Single Phase
Power SourceElectric
Material of ConstructionSteel, Cast Iron, Stainless steel
CapacityUp to 4000 LPM

Minimum order quantity: 1 Unit

We are the leading and prominent Manufacturer, Exporter and Trader of Radial Flow Centrifugal Pump.

Hot Oil Centrifugal Pump

  • Foil Print

₹ 42000/Unit Get Latest Price

Product Brochure
Headup to 120 meters
ModelBPO
Usage/ApplicationIndustrial
Medium temperature20~+80 Degree Celsius
Country of OriginMade in India

Minimum order quantity: 1 Unit

We are one of the leading manufacturer and supplier of Hot Oil Centrifugal Pump. We obligated to meet the quality standards as per the customer demands.

Centrifugal Back Pull Out Pump

  • Foil Print

₹ 24000/Unit Get Latest Price

Product Brochure
Type of end useAgricultural
Application/UsageFor Agricultural Usage
Headupto 180meters
I Deal InNew Only
ModelACH

Minimum order quantity: 1 Unit

Applications:

  • “ACH” type pumps are used in chemical & petrochemicals industry, food industry, dyeing , sugar industry, paper & pulp industry, fertilizer units & etc.
  • Handling of all types of liquids , acids , alkalis , dyes , hydrocarbons , corrosive slurries (solids up to 15 mm) , green , black liquor , pulp (consistency up to 2%) & etc.

Operating range:

Capacity

Up to 600 M3/Hr

Head

Up to 180 Mtrs (590 Feet)

Temperature

Up to 200° C (392° F)

Casing Pressure

Up to 24 Kg / cm2

Pump size ( Delivery bore)

DN 25 mm to DN 200 mm

Speed

Up to 2900 rpm

Direction of rotation

Clockwise from drive end


Design :

  • Horizontal Back Pull Out Design Pumps. Open And Semi Open Impeller Construction With One Cylindrical Roller Bearing On Pump End, One Double Row Angular Contact Ball Bearing On Drive End Designed In Accordance With Ansi B 16.5

Salient Features:

  • Back Pull Out Centrifugal Design
  • Steady Flow
  • Energy Efficient
  • Sturdy Construction
  • Low Npsh
  • Noise & Maintenance Free
  • Environment Friendly
  • Shaft Defection Below 0.05 Mm
  • Simple External Axial Adjustment For Impeller Wear & Tear
  • Bearing Life-more Than 17000 Operating Hours*.

Water Supply Back Pull Out Centrifugal Pump

  • Foil Print

₹ 12000/Piece Get Latest Price

Product Brochure
Power>10HP
MaterialCAST IRON/WCB/CS/SS-304/SS-316
Application/UsageFor Water Treatment Plants
Maximum HeadUPTO 120METER
Maximum Discharge FlowUP TO 990 M3/HR
Frequency50HZ
Motor Speed500 TO 3600 RPM
Pump SizeUP TO 250MM

Minimum order quantity: 1 Piece

BACK PULLOUT PUMPS:-

APPLICATION:-

For pumping Clear / Turbid water / Chemicals & Volatile Liquids. Air conditional plants , power station , Mine Drainage , Sprinkle systems fire fighting , Booster service , Oils Brine.

OPERATING RANGE:-

• Delivery size up to 250 mm 3
• Capacity up to 990M /hr
• Head up to 120 meters
• RPM 500 to 3600
 

Back Pull Out Centrifugal Pumps

  • Foil Print

₹ 8000/Unit Get Latest Price

Product Brochure
Type of end useAgricultural
Application/UsageFor Agricultural Usage
Headupto 120mtr
Max Flow Rate990m3/hr
I Deal InNew Only
ModelBPO
Country of OriginMade in India

Minimum order quantity: 1 Unit

FEATURES :

· More than 3mm corrosion allowance (Cast Iron) for extended use on corrosive applications.

· Back pull out construction allows rotating assembly to be withdrawn without disturbing the suction and delivery connections.

· One piece self vented foot mounted , center suction volute casing , single stage , closed / semi open dynamically balanced Impeller.

· Flange drilling standards as per DIN 24255 / ISO 2858 or as per Customer’s Requirement.

· Designed for 16 bar working pressure with optional casing for a working pressure of up to 20 bar.

· A robust and solid construction that guarantees long life even under high suction pressure conditions.

· Heavy –Duty, Deep- Grooved bearings with Minimum 50,000 hours operating life under normal condition. (Grease lubricated , Oil lubrication available on request)

· Heavy –Duty , Stiff solid shaft design with low L3/D4 ratio ensures less than 0.05 mm shaft deflection at the seal face in all operating condition. This extends the seal life.

· Seal housing is constructed to accommodate different seal / gland designs, so as to meet the severe heavy-duty requirements. (Standard is gland packing , seal version on special request)

· Excellent parts interchangeability reduces inventory levels for spare parts to a minimum.

· Special design for high temperature thermic fluid available on request.

· Motor or Engine driven sets.

· Special Monoblock versions available on request.

 

MATERIAL OF CONSTRUCTION :

Cast Iron Construction with En-8 Shaft , SS-410 Sleeve, Gland Packing and special material like WCB , CF-8 , CF-8M, Alloy 20 , SS-304 , SS-316 Fabricated etc on request

 

APPLICATIONS:-

For pumping Clear / Turbid water / Chemicals & Volatile Liquids.

Air conditional plants , power station , Mine Drainage ,

Sprinkle systems fire fighting , Booster service , Oils Brine.

Centrifugal Bare Shaft Coupled Pump With Trolley

  • Foil Print

₹ 22000/Unit Get Latest Price

Product Brochure
MaterialSS
BrandMalhar
Usage/ApplicationIndustrial
ColorGreen
Country of OriginMade in India

Minimum order quantity: 1 Unit

These pumps are stainless steel centrifugal monobloc and bare pumps (coupled).

These pumps are made from ss-304 or ss-316 sheet. The pumps are precisely

fabricated . These pumps wetted parts are of stainless steel and widely used in chemical and process industries. As these pumps are fabricated from steel, it is also widely used in dairy, food and beverages industries, wine , RO and DM plant ,sea water applications. These pumps are available from 0.25 HP

 to 30 HP . head up to 90 meter and capacity up to 3000 LPM. The unique feature is

international quality at affordable price with minimum delivery period.

We offer a wide assortment of stainless steel centrifugal pumps, which are

extensively used in various engineering, fluid based and other industries for transporting of milk, juice, water, chemicals etc. Fabricated using high grade stainless steel, these pumps are acknowledged for high durability and flexibility. Innovatively designed, these pumps ensure trouble free performance and energy efficiency.

FEATURES:-

  • As all pumps are made from rolled stainless steel, mechanical properties are far superior then cast material.
  • Pore free, non-pitting and non-adhering smoother surface, so less friction losses, and less service   corrosion.
  • Super finish surface also ensure no ingress or emission of germs or impurities during pumping or idling which is basic requirement of sterile / hygienic application.
  • Pump can handle liquids having viscosities up to 1500 centipoises.
  • Pumps are highly energy efficient and requires less NPSH to function without cavitation.
  • The pumps can work under a vacuum of 720 mm of Hg, suitable for vacuum evaporators.
  •  Pumps are available with dosed/semi open impellers.
  • The best elastomers are used in the pumps to provide optimum resistance for high temperatures  and chemicals.
  • Minimum working / rotating parts.
  • Safe and quite operation levels.
  • Gentte product handling with lower maintenance and downline cost.
  • Dynamically combinations of seal faces as per customer''s requirement (single seal / double seal, seal external cooling ).
  • Suitable for standard motor or flange type or foot cum flange type motor or engine
  • Monobloc or bare pumps or with trolley.
  • Also with flame proof motors.
  • Various types of connection like - tri''clove joints SMS, flanges or threaded nipple/coupling.

Non Clog Sludge Pump

  • Foil Print

₹ 14200/Piece Get Latest Price

Product Brochure
Usage/ApplicationIndustrial
Motor Horsepower5 - 20 HP
Model Name/NumberMP
BrandMALHAR
ColorGrey
I Deal InNew Only

Minimum order quantity: 1 Piece

We provide a qualitative range of Mud Pumps, which are immensely used in construction, agriculture, waste water management and many other industries. These Mud Pumps are primarily reciprocating plunger devices designed for circulation of drilling fluid down the drill string and back up the annulus. Our range of pumps are suitable for pumping muddy water, sewage, polluted liquids & solids and also in swimming pool. Manufactured using latest technology, these pumps are high performing, abrasion resistant, easy to install and have long service life.

Special Features

  • Excellent quick automatic priming action without foot valve up to 8 mtrs.
  • Automatic air release during priming.
  • Back pull out design, so easy maintenance without disturbing pipe lines.
  • Dynamically balanced rotating parts ensure less vibrations.
  • Better efficiency because of good hydraulic design.
  • Minimum parts, fast repairing at low cost, Also pump is available at economical rate,
  • Available in Bare, Coupled, Monobloc, Belt driven & Engine driven version.
  • Also offered pump with trolley / trailer to move it from one place to another,
  • Monobloc pumps can be able to with stand with wide voltage fluctuations,
  • Pumps can be fitted with mechanical seal as per customer's requirements
  • Less expensive & easily available spares.
  • Very simple construction, only two moving parts
  • Easy inspection of impeller.
  • Large diameter solids handled . up to GO mm
  • High resistance, to abrasive liquids the wear plate is easily replaced and wear plate and impeller are also available with ceramic coating
  • Easy to install:- only the suction hose is immersed in the liquid, The pump can be set up high and dry in the most convenient position for inspection and maintenance.
  • Long Life :- The parts subject to wear can be easily replaced one or more times to restore the original performance.
Application
  • Public utilities : For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.
  • Dewatering Basements, Trenches, Construction sites
  • Onboard shift, as bildge, for desk wash & engine cooling.
  • Tiles & Marble factories, effluent plants.
Mobile Machinery : Cooling water for marine engines and shovels
  • Any application where priming is to be avoided,
Industry : Transfer of clean 01 dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum products or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty.

Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids.

Naval duty: Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation,

Waste treatment: Pumping polluted, hot or corrosive waste water containing sand, mud or solids in suspension; dosing neutralising liquids; pumping out settled sludge.

Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with wellpoint systems or drains; water supply from wells or canals; hosing down concrete castings.

Agriculture : 
Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilisers, distribution of liquid animal feed; transfer of must; washing.

Oil Seal Vacuum Pump

  • Foil Print

₹ 25000/Piece Get Latest Price

Product Brochure
Flow Rate30 m3
TypeBelt Drive Rotary Vane Pumps
Power>5 HP
Usage/ApplicationIndustrial
MaterialCast Iron
Motor Speed1450RPM

ROTARY VANE TYPE VACUUM-PRESSURE PUMP:-

These models are quite versatile and find their applications in Pharmaceutical & Chemical Industries for Distillation, Evacuation & Filtration, Paper feeding in Printing Machines and is suitable for host of other general Vacuum Applications like Holding, Conveying, Glass Blowing, Labelling, Vacuum Forming, Blister Packing, Bottle Filling, Vacuum Sealing , Food Processing & Milking Machines etc.

RANGE:-

• Capacity Free Air Displacement: 100 – 2000  lpm,
• Ultimate Vacuum MM OF Hg : 650-700
• Motor Hp Range : 0.25 hp – 7.5 hp
• RPM : 1440

Centrifugal Thermic Fluid Pump

  • Foil Print

₹ 45000/Piece Get Latest Price

Product Brochure
Power>10 HP
Capacity>1500 m3/hr
Motor PhaseThree Phase
Head>30 meter
MaterialCast Iron
BrandMalhar

Minimum order quantity: 1 Piece

We are the suppliers of Chemical Pump.

Features :-

  • Low Maintenance.
  • Easy to Operate.
  • Longer service life.

 

Specifications (As per ISO 2858/DIN 24256) :-

 

  • Capacity up to 250 m3/hr
  • Temperature up to 350ºc
  • TDH up to 95 mlc.
  • Working Pressure up to 20 Bars
  • Delivery Size up to 100 mm.
  • Speed – n- :- 960/1450/2900 rpm

 

Industries Covered:-


  • Pharmaceuticals & Chemical :- Oil Extraction plants
  • Pulp & Paper Industries :- Waste Oil Refining Plants
  • Starch Industries :- Air-Conditioning Heating plants
  • Effluent Treatments Plants :-Cooling Tower water Circulation
  • Dyes & Intermediates :- Solvent Transfer
  • Ro & DM Water Plants :- Thermic Fluid Circulation.

Technical Specifications :-

Pumps are manufactured in variety of materials such as Carbon steel / WCB As per ASTM / DIN Standards.

  • Stainless steel as per ASTM A 351/743 Gr. CF8/CF8M.
  • Carbon Steel (WCB) / Alloy Steel.
  • Cf-8 , CF-8M CF-3 ,CF-3M (SS-316L) , Alloy 20 , CD4MCu.

Water Treatment Centrifugal Back Pull Out Pump

  • Foil Print

₹ 9000/Unit Get Latest Price

Product Brochure
Type of end useIndustrial
Application/UsageFor Water Treatment Plants
Head120 meters
I Deal InNew Only
ModelBPO

Minimum order quantity: 1 Unit

FEATURES :

More than 3mm corrosion allowance (Cast Iron) for extended use on corrosive applications.

Back pull out construction allows rotating assembly to be withdrawn without disturbing the suction and delivery connections.

One piece self vented foot mounted , center suction volute casing , single stage , closed / semi open dynamically balanced Impeller.

Flange drilling standards as per DIN 24255 / ISO 2858 or as per Customer’s Requirement.

Designed for 16 bar working pressure with optional casing for a working pressure of up to 20 bar.

A robust and solid construction that guarantees long life even under high suction pressure conditions.

Heavy –Duty, Deep- Grooved bearings with Minimum 50,000 hours operating life under normal condition. (Grease lubricated , Oil lubrication available on request)

Heavy –Duty , Stiff solid shaft design with low L3/D4 ratio ensures less than 0.05 mm shaft deflection at the seal face in all operating condition. This extends the seal life.

Seal housing is constructed to accommodate different seal / gland designs, so as to meet the severe heavy-duty requirements. (Standard is gland packing , seal version on special request)

Excellent parts interchangeability reduces inventory levels for spare parts to a minimum.

Special design for high temperature thermic fluid available on request.

Motor or Engine driven sets.

Special Monoblock versions available on request.

MATERIAL OF CONSTRUCTION :

Cast Iron Construction with En-8 Shaft , SS-410 Sleeve, Gland Packing and special material like WCB , CF-8 , CF-8M, Alloy 20 , SS-304 , SS-316 Fabricated etc on request

APPLICATIONS:-

For pumping Clear / Turbid water / Chemicals & Volatile Liquids.

Air conditional plants, power station, Mine Drainage,

Sprinkle systems fire fighting, Booster service, Oils Brine.

Back Pull Out Engine Driven Coupled Pump

  • Foil Print

₹ 48000/Unit Get Latest Price

Product Brochure
Type of end useIndustrial
ColorBlue
I Deal InNew Only
Power SourceElectric
Country of OriginMade in India

Minimum order quantity: 1 Unit

Features:

· More than 3mm corrosion allowance (Cast Iron) for extended use on corrosive applications.

· Back pull out construction allows rotating assembly to be withdrawn without disturbing the suction and delivery connections.

· One piece self vented foot mounted , center suction volute casing , single stage , closed / semi open dynamically balanced Impeller.

· Flange drilling standards as per DIN 24255 / ISO 2858 or as per Customer’s Requirement.

· Designed for 16 bar working pressure with optional casing for a working pressure of up to 20 bar.

· A robust and solid construction that guarantees long life even under high suction pressure conditions.

· Heavy –Duty, Deep- Grooved bearings with Minimum 50,000 hours operating life under normal condition. (Grease lubricated , Oil lubrication available on request)

· Heavy –Duty , Stiff solid shaft design with low L3/D4 ratio ensures less than 0.05 mm shaft deflection at the seal face in all operating condition. This extends the seal life.

· Seal housing is constructed to accommodate different seal / gland designs, so as to meet the severe heavy-duty requirements. (Standard is gland packing , seal version on special request)

· Excellent parts interchangeability reduces inventory levels for spare parts to a minimum.

· Special design for high temperature thermic fluid available on request.

· Motor or Engine driven sets.

· Special Monoblock versions available on request.

 

MATERIAL OF CONSTRUCTION :

Cast Iron Construction with En-8 Shaft , SS-410 Sleeve, Gland Packing and special material like WCB , CF-8 , CF-8M, Alloy 20 , SS-304 , SS-316 Fabricated etc on request

 

APPLICATIONS:-

For pumping Clear / Turbid water / Chemicals & Volatile Liquids.

Air conditional plants , power station , Mine Drainage ,

Sprinkle systems fire fighting , Booster service , Oils Brine.

Thermal Hot Oil Pump

  • Foil Print

₹ 42000/Piece Get Latest Price

Product Brochure
Power>10 HP
Max Flow Rate500 m3/hr
Head>30 meter
MaterialCI/WCB/CS/SS-304/SS-316

THERMIC FLUID PUMP 

APPLICATION :- 

  • These pumps are normally made from WCB/SS Material which are able to withstand with high Temperature application and hot oil transfer in boiler. 
  • Our pumps are suitable for both organic and inorganic fluids and used in oil refineries, food, chemical, textile industries and sea water desalination plants. 
  •  These pumps are equipped with water/self cooling feature that makes them suitable for the applications in heat transfer plants and handling of organic heat transferring of oils. 
  • In compliance with the latest industry standards, these pumps are designed with heavy duty bearings.

OPERATING RANGE :- 

• Capacity : up to 250 M /hr
• Temperature : up to 350ºc
• TDH : up to 95 mlc
• Working Pressure : up to 20 Bars
• Delivery Size : up to 100 mm
• Speed : 960/1450/2900 r

Horizontal Centrifugal Back Pull Out Bare Shaft Coupled Pump

  • Foil Print

₹ 25000/Piece Get Latest Price

Product Brochure
Materialcf-8 , cf-8m, alloy 20 , ss-304 , ss-316 fabricated
Application/UsageFor Chemical Process & Pharmaceutical Industry
BrandCreative Engineers
ColorGreen
I Deal InNew Only
UseFor pumping clear / turbid water / chemicals & volatile liquids
Country of OriginMade in India

Features:

  • More than 3mm corrosion allowance (cast iron) for extended use on corrosive applications.
  • Back pull out construction allows rotating assembly to be withdrawn without disturbing the suction and delivery connections.
  • One piece self vented foot mounted , center suction volute casing , single stage , closed / semi open dynamically balanced impeller.
  • Flange drilling standards as per din 24255 / iso 2858 or as per customer’s requirement.
  • Designed for 16 bar working pressure with optional casing for a working pressure of up to 20 bar.
  • A robust and solid construction that guarantees long life even under high suction pressure conditions.
  • Heavy –duty, deep- grooved bearings with minimum 50,000 hours operating life under normal condition. (grease lubricated , oil lubrication available on request)
  • Heavy–duty , stiff solid shaft design with low l3/d4 ratio ensures less than 0.05 mm shaft deflection at the seal face in all operating condition. This extends the seal life.
  • Seal housing is constructed to accommodate different seal / gland designs, so as to meet the severe heavy-duty requirements. (standard is gland packing , seal version on special request)
  • Excellent parts interchangeability reduces inventory levels for spare parts to a minimum.
  • Special design for high temperature thermic fluid available on request.
  • Motor or engine driven sets.
  • Special monoblock versions available on request.

Material of construction:

  • Cast iron construction with en-8 shaft , ss-410 sleeve, gland packing and special material like wcb , cf-8 , cf-8m, alloy 20 , ss-304 , ss-316 fabricated etc on request

Applications:-

  • For pumping clear / turbid water / chemicals & volatile liquids.
  • Air conditional plants , power station , mine drainage ,
  • Sprinkle systems fire fighting , booster service , oils brine.

Centrifugal Back Pull Out Bare Shaft Coupled Pump

₹ 20000/Unit Get Latest Price

Product Brochure
Type of end useIndustrial
Motor Horsepower10HP
MaterialCAST IRON
StagesSingle Stage
Motor PhaseThree Phase
Pump TypeCENTRIFUGAL
Application/UsageFor Chemical Process & Pharmaceutical Industry
Head70 MTR
Max Flow Rate400 - 500MR/HR

Minimum order quantity: 1 Unit

We are leading Manufacturers of Centrifugal Back Pull Out Bare Shaft Coupled Pump

Features:-

  • More than 3mm corrosion allowance (cast iron) for extended use on corrosive applications.
  • Back pull out construction allows rotating assembly to be withdrawn without disturbing the suction and delivery connections.
  • One piece self vented foot mounted , center suction volute casing , single stage , closed / semi open dynamically balanced impeller.
  • Flange drilling standards as per din 24255 / iso 2858 or as per customer’s requirement.
  • Designed for 16 bar working pressure with optional casing for a working pressure of up to 20 bar.
  • A robust and solid construction that guarantees long life even under high suction pressure conditions.
  • Heavy –duty, deep- grooved bearings with minimum 50,000 hours operating life under normal condition. (grease lubricated , oil lubrication available on request)
  • Heavy–duty , stiff solid shaft design with low l3/d4 ratio ensures less than 0.05 mm shaft deflection at the seal face in all operating condition. This extends the seal life.
  • Seal housing is constructed to accommodate different seal / gland designs, so as to meet the severe heavy-duty requirements. (standard is gland packing , seal version on special request)
  • Excellent parts interchangeability reduces inventory levels for spare parts to a minimum.
  • Special design for high temperature thermic fluid available on request.
  • Motor or engine driven sets.
  • Special monoblock versions available on request.

Material of construction :
  • Cast iron construction with en-8 shaft , ss-410 sleeve, gland packing and special material like wcb , cf-8 , cf-8m, alloy 20 , ss-304 , ss-316 fabricated etc on request

Applications:-

  • For pumping clear / turbid water / chemicals & volatile liquids.
  • Air conditional plants , power station , mine drainage ,
  • Sprinkle systems fire fighting , booster service , oils brine.

SS Back Pull Out Pump

₹ 20000/Piece Get Latest Price

Product Brochure
Power>10HP
Type of end useIndustrial
StagesSingle Stage
MaterialCI,WCB,SS-304,SS-316
Motor PhaseThree Phase
Application/UsageFor Chemical Process & Pharmaceutical Industry
Maximum Head200MTR
Maximum Discharge Flow1000M3/HR
ModelBPO
Country of OriginMade in India

Minimum order quantity: 1 Piece

We manufacture and supply back pull out pumps, which are extensively used in air conditioning plants, power station, mine drainage, sprinkler systems fire fighting etc.

Technical Features:-

Brand Malhar
Model BPO
Max Flow Rate 5-300 cube per hour
Head 5-100mtr


Features :-

  • More than 3mm corrosion allowance (cast iron) for extended use on corrosive applications.
  • Back-pull-out construction allows rotating assembly to be with drawn without disturbing the suction and delivery connections.
  • one piece self vanted foot mounted, center suction volute casing, single stage, closed / semi open dynamically balanced impeller.
  • flange drilling standards as per DIN 24255 / ISO 2858 or as per customer's requirement.
  • Designed for 16 bar working pressure with optional casing for a working pressure of up to 20 bar.
  • A robust and solid construction that guarantees long life even under high suction pressure conditions.
  • Heavy-duty, deep-grooved bearings with minimum 50,000 hours operating life under normal condition. (Grease lubricated, oil lubrication available on request)
  • Heavy-duty, stiff solid shaft design with low L3/D4 ratio ensures less than 0.05mm shaft deflection at the seal face in all operating conditions. This extends the seal life.
  • Seal housing is constructed to accommodate different seal/gland designs, so as to meet the severe heavy-duty requirements.
  • Excellent parts interchangeability reduces inventory levels for spare parts to a minimum.
  • Special design for high temperature thermic fluid available on request.

Applications


For pumping clear/turbid water/chemicals & volatile liquids. Air conditioning plants, power station, mine drainage, sprinkler systems fire fighting, booster service, oils, brine.

Acid Pump

  • Foil Print

₹ 11000/Piece Get Latest Price

Product Brochure
BrandMalhar
Headupto 20meter
Max Flow Rateupto 165LPM
Modelpp

Minimum order quantity: 1 Piece

We are one of the foremost manufacturers, suppliers and exporters of high grade Acid Pump. Post production, our pump is thoroughly inspected on several parameters so as to assure of its high performance. Owing to its high pumping capacity, excellent corrosion resistance and ability to withstand high temperature & pressure, our Acid Pump is highly demanded in the market. It is widely being used in rolling mills and in pickling & electroplating applications.Our company has an expertise in manufacturing of Acid Pump.

Applications:


  • Water treatment plant, Effluent treatment plant, electro plating, pickling & steel
  • Excellent for transfer and loading and "unloading like HCL, Sulphuric Acid/Alkali,
  • Caustic liquid
  • Scrubbing of corrosive gases like NH3, CO2, SO2, L2, F2, Br2, CI2, etc.
  • For handling liquids in various like textile, paper, cellulose, sugar, steel, food, having,
  • Temperature range, materials etc,,,,,
  • Ideal for circulation for pickling line & scrubber in Steel plant
  • High capacity transfer pump, filter press for dyes & chemical, descaling, Oil & other fuels

Features:

  • Small size bare / monoblac poly propelene pumps.
  • Fitted with seal / gland or PTFE bellow Mechanical seal.
  • Shaft is of SS-304 / 316 with ceramic coating and (PTFE coating optional)
  • Very economical models as pumps made with minimum parts.
  • Very easy maintanance.

Centrifugal Bare Pump

₹ 7000/Unit Get Latest Price

Product Brochure
Motor Horsepower5 HP, 2 HP, 10 HP, 6.5 HP, 0.5 HP, 3 HP, 8 HP, 1 HP
Motor PhaseSingle Phase
Warranty (in months)12 months
Power SourceDiesel, Electric
Cooling MethodWater Cooled
Material of ConstructionStainless steel, Cast Iron
BrandMALHAR
Type of end useIndustrial
ConditionNew

Minimum order quantity: 1 Unit

We are a chief Manufacturer, Exporter and Importer of the premium quality Centrifugal Bare Pump. Our Centrifugal Pumps are stainless steel centrifugal monoblock and bare pumps (coupled). Centrifugal Pumps are made from ss-304 or ss-316 sheet. These are precisely fabricated. Its wetted parts are of stainless steel and are widely used in chemical and process industries. As these pumps are fabricated from steel, it is also widely used in dairy, food and beverages industries, wine, RO and DM plant, sea water applications. These pumps are available from 0.25 HP to 30 HP. Our Centrifugal Pump head up to 90 meter and its capacity is up to 3000 LPM. Our Centrifugal Pump is of international quality at affordable price with minimum delivery period.

Features:


  • As all pumps are made from rolled stainless steel, mechanical properties are far superior then cast material.
  • Pore free, non-pitting and non-adhering smoother surface, so less friction losses, and less service corrosion.
  • Super finish surface also ensure no ingress or emission of germs or impurities during pumping or idling which is basic requirement of sterile / hygienic application.
  • Pump can handle liquids having viscosities up to 1500 centipoises.
  • Pumps are highly energy efficient and requires less NPSH to function without cavitation.
  • The pumps can work under a vacuum of 720 mm of Hg, suitable for vacuum evaporators.
  • Pumps are available with dosed/semi open impellers.
  • The best elastomers are used in the pumps to provide optimum resistance for high temperatures and chemicals.
  • Minimum working / rotating parts.
  • Safe and quite operation levels.
  • Gentte product handling with lower maintenance and downline cost.
  • Dynamically combinations of seal faces as per customer's requirement (single seal / double seal, seal external cooling ).
  • Suitable for standard motor or flange type or foot cum flange type motor or engine
  • Monobloc or bare pumps or with trolley.
  • Also with flame proof motors.
  • Various types of connection like - tri'clove joints SMS, flanges or threaded nipple/coupling.
  • Pumps with adjustable legs, available on request.
  • Special bearing for hot water application available on request.

Chemical PP Pump

₹ 13000/Piece Get Latest Price

Product Brochure
Modelpp
Max Flow Rate165LPM
Head20meter
BrandMalhar

Minimum order quantity: 1 Piece

Our range of PP Pump are designed and manufactured by our team of technical experts who have in-depth understanding of the components and the functional features of these pumps.
The application areas of polypropylene pumps include :

  • Phosphoric acid plants
  • Gas washing plants
  • Rayon plants
  • Caustic soda plants for corrosive acids & basics
  • Effluent treatment handling

Features of the range

  • Small size bare / mono bloc poly propylene pumps.
  • Fitted with seal / gland or Teflon bellow mechanical seal.
  • Shaft is of SS-304 / 316 with ceramic coating (Teflon coating optional).
  • Very economical models as pumps are made with minimum parts.

PP Vertical Sump Pump

  • Foil Print

₹ 70000/Piece Get Latest Price

Product Brochure
Max Flow Rate50m3/hr
Head120 M

FEATURES: 

Vertical Centrifugal process pump can be used in any installation and especially where the saving of space is an important factor or where liquid is difficult to lift because of nature like temp , corrosiveness etc These pump are designed for use where the liquid to be handled is of highly corrosive Nature or where non – adherence of product or zero metallic contamination is must.
These pumps are equally ideal for continuous or intermittent service for handling Corrosive as well as ultra pure chemicals without fear of corrosion or contamination.

High Temperature services: 
Maximum working temperature is 110 C / 200 C.

Length:
Pump lengths available from 1' to 12' with flow rate up to 50M /h or 120 meter head. Higher capacities and head available on request and even multistage pump can be also made.

Models: 
Available in conventional or tailor-made configuration. Several models such as suction extension with float switch, duplex pumping station with float switch (auto on/off device) are also available.

APPLICATION:
• These pumps are in extensive use in the fields of • Pollution Control. • Filtration . • Transferring Corrosive Chemicals . • Slurries . • Bio gas plants. • Sewage. • Waste water treatment plant. • Phosphoric Acid Plant. H,PO,H SIF , 2 s H2SO4, HF And .Their Mixtures. • Gas washing plant . • Scrubbed liquids containing , F,Cl,SO2, Ammonia • Water treatment plant . • Any types of acidic water lifting . • M.S Vertical pump are used for transfer of sulphuric acid 98 %. OLUM, CLOTO, NEPTHA

Hot Oil Pump

₹ 42000/Piece Get Latest Price

Product Brochure
Power10 HP
Max Flow Rate400 - 500M3/HR
Head30 meter
MaterialCast Iron
Warranty12 MONTHS
Country of OriginMade in India

Minimum order quantity: 1 Piece

We are one of the leading manufacturer and supplier of Hot Oil Centrifugal Pump. We obligated to meet the quality standards as per the customer demands.

FEATURES :  More than 3mm corrosion allowance (Cast Iron) for extended use on corrosive applications.  Back pull out construction allows rotating assembly to be withdrawn without disturbing thesuction and delivery connections.  One piece self vented foot mounted , center suction volute casing , single stage , closed / semiopen dynamically balanced Impeller.  Flange drilling standards as per DIN 24255 / ISO 2858 or as per Customer’s Requirement.  Designed for 16 bar working pressure with optional casing for a working pressure of up to 20 bar. A robust and solid construction that guarantees long life even under high suction pressure conditions.  Heavy –Duty, Deep- Grooved bearings with Minimum 50,000 hours operating life under normalcondition. (Grease lubricated , Oil lubrication available on request)  Heavy –Duty , Stiff solid shaft design with low L3/D4 ratio ensures less than 0.05 mm shaft deflection at the seal face in all operating condition. This extends the seal life.  Seal housing is constructed to accommodate different seal / gland designs, so as to meet thesevere heavy-duty requirements. (Standard is gland packing , seal version on special request) Excellent parts interchangeability reduces inventory levels for spare parts to a minimum.  Special design for high temperature thermic fluid available on request.  Motor or Engine driven sets.  Special Monoblock versions available on request. MATERIAL OF CONSTRUCTION : Cast Iron Construction with En-8 Shaft , SS-410 Sleeve, Gland Packing and special material likeWCB, CF-8 , CF-8M, Alloy 20 , SS-304 , SS-316 Fabricated etc on request APPLICATIONS:- For pumping Clear / Turbid water / Chemicals & Volatile Liquids. Air conditional plants , power station , Mine Drainage , Sprinkle systems fire fighting , Booster service , Oils Brine. OPERATING RANGE : Delivery size up to 250 mm, Capacity up to 990 m3/hr, Head up to 120 meters RPM 500 TO 3600 

Seal- Less Gland Less Centrifugal Pump

  • Foil Print

₹ 9000/Unit Get Latest Price

Product Brochure
Brandmalhar

Working principle: we have made shaft and stuffing box long and provide special arrangement in stuffing box with groove on shaft in such a way that liquid which come out from stuffing box will go back again to casing .Some liquid is may be come out but due to deep stuffing box it will remain in stuffing box and we have provide one hole in box which is connected to suction flange of pump by pipe line so liquid will again move to suction line and thus pump do not have any leakage from shaft .This pump is very ideal for solvents , acids and corrosives liquids where maintenance of mechanical seal is costly and also time consuming .Our complete CF series pumps will be soon available with above features and after some time we also give PP pumps with same features.

Cast Iron Centrifugal Pump

₹ 9000/Unit Get Latest Price

Product Brochure
BrandCreative engineers
Motor Horsepower3 HP, 8 HP, 5 HP, 6.5 HP, 10 HP
Power SourceElectric, Diesel
Cooling MethodWater Cooled
Motor Horse power10 HP,3 HP,2 HP,1 HP,5 HP
Material Cast Iron
Condition New

Minimum order quantity: 1 Unit

We are the Manufacturer of Cast Iron Centrifugal Pump

Horizontal Split Casing Centrifugal Pumps

₹ 40000/Unit Get Latest Price

Product Brochure
Model Name/NumberHSC
BrandMALHAR
StagesTwo Stage
MaterialCast Iron
Maximum Discharge Flowupto 18000m3/hr

Minimum order quantity: 1 Unit

We are offering of Horizontal Centrifugal Pumps (Horizontal Axially Double Suction Split Casing Centrifugal Pumps).

Applications and Industries:

  • Water supply
  • Building Services
  • Circulating Water Systems
  • Paper Mills
  • Water / Effluent Treatment
  • Pharmaceuticals
  • Irrigation
  • Sugar Mills
  • Ports and Docks
  • Vegetable Oil Mills
  • Air Conditioning
  • General Industry Requirements
  • Fire fighting

X

Contact Us

Gaurang Shah (Proprietor)
Creative Engineers
4317, BEHIND TECHNO INDUSTRIES, PHASE-4, FOR U ROAD, VATVA GIDC
Ahmedabad - 380028, Gujarat, India

Get Directions
Send Email
Share:
Thank youYour Enquiry has been sent successfully.