Self Priming Pump

Pioneers in the industry, we offer self priming mono block pump, self priming bare pump, ss and cast iron self priming bare shaft coupled pump, self priming non clog mud pump, self priming pump and self priming centrifugal pump from India.

Self Priming Mono Block Pump

  • Foil Print

₹ 16000/Piece Get Latest Price

Product Brochure
Motor Speed (RPM)2900
Motor HorsepowerLess than 1 HP
Maximum Discharge FlowLess than 100 LPM
Maximum Head51 to 100 m
Discharge Outlet SizeLess than 25 mm
Power SourceElectric
Warranty12 months
Installation/After Sales ServiceNo

Self Priming Mono Block Pump which are ideal for use in different hosehold , commercial and agricultural applications


APPLICATION:- 

All clear liquids without solid suspensions

like diesel, petrol, LPG, oil, solvents, syrup,

dm water, chemicals, steam boiler feeding,

evacuation of condensate water, boosting

 

of pressure, as a drum/barrel pump.


FEATURES:-

• All wetted parts of pumps are made from lost wax process.

(investment casting), so surface finish is excellent. Smooth flow

path/ hydraulic passage and no casting defects like blow holes,

cracks etc. are present.

• Centripetal / regenerative impeller for better suction.

• Pumps will be normally available in CF-8m /CF-8 (Gun metal,

Alloy-20) and also in other material as per customer's requirements.

• Single /multistage pumps to handle crystal clear liquids for high

pressure duties.

• Very quick priming & no need of foot valves.

• Very high suction capacity up to 8 meters without much noise

• Various types of sealing arrangements as per customer's liquid's characteristics.

• Normally fitted with carbon/ceramic seal faces with teflon cup and viton rubber.

• Pumps are available in monoblock and in bare type also with flameproof motor.

• All motors are of "TEFC" type

• Pump can be offered with electro polishing for some special requirements.

• Can handle temperature up to 80oC

• Trolley mount available.

• Also available with 120 Volt / 60 Hz.

 

• Custom built pumps are available.



Self Priming Bare Pump

  • Foil Print

₹ 9000/Piece Get Latest Price

Product Brochure
Pump TypeBare Pump
MaterialSteel
Motor Horsepower0.5
ColorBlue
Power SourceElectric
Country of OriginMade in India

Self Priming Bare Pump which are ideal for use in different hosehold , commercial and agricultural applications.


Features:


  • All wetted parts of pumps are made from lost wax process (investment casting), so excellent surface finish. smooth flow path/ hydraulic passage and no casting defects like blow holes, cracks etc.
  • Centripetal / regenerative impeller for better suction.


Specifications:

 

  • Pumps will be normally available in CF-8m /CF-8 (Gun metal, Alloy-20) and also in other material as fee customer's requirements.
  • Single /multistage pumps to handle crystal cleat liquids for high pressure duties.
  • Very quick priming, no need of foot valves.
  • Very high suction capacity up to 8 meters without much noise
  • Various types of sealing arrangements as per customer's liquid characteristics.
  • Normally fitted with carbon/ceramic seal faces with teflon cup and viton rubber,
  • Pumps are available in monoblock and in bare type also with flameproof motor.
  • All motors are of "TCFC" type
  • Pump can be offered with electro polishing for some special Requirements.
  • Able to handle temperature up to 80 C
  • Trolley mounted available.
  • Also available with 120 Volt / 60 Hz.
  • Custom built pumps available

SS and Cast Iron Self Priming Bare Shaft Coupled Pump

  • Foil Print

₹ 18000/Unit Get Latest Price

Product Brochure
Pump Typeself priming pump
BrandMALHAR
Head150
Usage/ApplicationIndustrial
Model Name/NumberSHP
Motor Horsepower0.5 to 30 hp
MaterialStainless Steel
Maximum Discharge Flow300 LPM Max
Discharge PressureMax 150 mtr or 15 bar
Power SourceElectric or diesel engine

Minimum order quantity: 1 Unit

All Clear liquids without solid suspensions like diesel, petrol, LPG, oil, solvents, syrup, DM water, Chemicals, steam boiler feeding, evacuation of condensate water, boosting of pressure with SS Self Priming Bare Shaft Coupled Pump.

Features:

  • All wetted parts of pumps are made from lost wax process (investment casting), so excellent surface finish. smooth flow path/ hydraulic passage and no casting defects like blow holes, cracks etc.
  • Centripetal / regenerative impeller for better suction.
  • Pumps will be normally available in CF-8m /CF-8 (Gun metal, Alloy-20) and also in other material as fee customer's requirements.
  • Single /multistage pumps to handle crystal cleat liquids for high pressure duties.
  • Very quick priming, no need of foot valves.
  • Very high suction capacity up to 8 meters without much noise
  • Various types of sealing arrangements as per customer's liquid characteristics.
  • Normally fitted with carbon/ceramic seal faces with Ptfe cup and viton rubber,
  • Pumps are available in monobloc and in bare type also with flameproof motor.
  • All motors are of "TCFC" type
  • Pump can be offered with electro polishing for some special Requirements.
  • Able to handle temperature up to 80 C
  • Trolley mounted available.
  • Also available with 120 Volt / 60 Hz.

Self Priming Non Clog Mud Pump

  • Foil Print

₹ 14200/Piece Get Latest Price

Product Brochure
Power>10HP
Pump TypeSELF PRIMING CUM CENTRIFUGAL MUD PUMP
BrandMALHAR
MaterialCAST IRON / SS
Discharge PressureUPTO 10KG/CM2
ColorGrey
Max Flow Rate400 M3/HR
Power SourceElectric
Impeller TypeSEMI-OPEN
Country of OriginMade in India

We provide a qualitative range of Mud Pumps, which are immensely used in construction, agriculture, waste water management and many other industries. These Mud Pumps are primarily reciprocating plunger devices designed for circulation of drilling fluid down the drill string and back up the annulus. Our range of pumps are suitable for pumping muddy water, sewage, polluted liquids & solids and also in swimming pool. Manufactured using latest technology, these pumps are high performing, abrasion resistant, easy to install and have long service life.

Special Features

  • Excellent quick automatic priming action without foot valve up to 8 mtrs.
  • Automatic air release during priming.
  • Back pull out design, so easy maintenance without disturbing pipe lines.
  • Dynamically balanced rotating parts ensure less vibrations.
  • Better efficiency because of good hydraulic design.
  • Minimum parts, fast repairing at low cost, Also pump is available at economical rate,
  • Available in Bare, Coupled, Monobloc, Belt driven & Engine driven version.
  • Also offered pump with trolley / trailer to move it from one place to another,
  • Monobloc pumps can be able to with stand with wide voltage fluctuations,
  • Pumps can be fitted with mechanical seal as per customer's requirements
  • Less expensive & easily available spares.
  • Very simple construction, only two moving parts
  • Easy inspection of impeller.
  • Large diameter solids handled . up to GO mm
  • High resistance, to abrasive liquids the wear plate is easily replaced and wear plate and impeller are also available with ceramic coating
  • Easy to install:- only the suction hose is immersed in the liquid, The pump can be set up high and dry in the most convenient position for inspection and maintenance.
  • Long Life :- The parts subject to wear can be easily replaced one or more times to restore the original performance.
Application
  • Public utilities : For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.
  • Dewatering Basements, Trenches, Construction sites
  • Onboard shift, as bildge, for desk wash & engine cooling.
  • Tiles & Marble factories, effluent plants.
Mobile Machinery : Cooling water for marine engines and shovels
  • Any application where priming is to be avoided,
Industry : Transfer of clean 01 dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum products or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty.

  • Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids.

  • Naval duty: Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation,

  • Waste treatment: Pumping polluted, hot or corrosive waste water containing sand, mud or solids in suspension; dosing neutralising liquids; pumping out settled sludge.

  • Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with wellpoint systems or drains; water supply from wells or canals; hosing down concrete castings.

  • Agriculture : Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilisers, distribution of liquid animal feed; transfer of must; washing.


Self Priming Pump

  • Foil Print

₹ 11500/Unit Get Latest Price

Product Brochure
Power SourceElectric
Discharge PressureMax 2.5 Kg Per Cm2
Maximum Discharge Flow18 LPM
Pump TypeSelf Priming

Minimum order quantity: 1 Unit

We offer Self Priming Pump which are Ideal for use in different household, commercial and agricultural applications, our PMS series self priming pumps are specifically designed for low power consumption and to allow the pump to re-prime itself typically under lift conditions. These pumps eliminate the need for foot valves, vacuum and ejector pumps, which get clogged during prolonged or remote operation.

Features:


  • All wetted parts of pumps are made from lost wax process (investment casting), so excellent surface finish. smooth flow path/ hydraulic passage and no casting defects like blow holes, cracks etc.
  • Centripetal / regenerative impeller for better suction.

Specifications:

  • Pumps will be normally available in CF-8m /CF-8 (Gun metal, Alloy-20) and also in other material as fee customer''s requirements.
  • Single /multistage pumps to handle crystal cleat liquids for high pressure duties.
  • Very quick priming, no need of foot valves.
  • Very high suction capacity up to 8 meters without much noise
  • Various types of sealing arrangements as per customer''s liquid characteristics.
  • Normally fitted with carbon/ceramic seal faces with teflon cup and viton rubber,
  • Pumps are available in monoblock and in bare type also with flameproof motor.
  • All motors are of "TCFC" type  
  • Pump can be offered with electro polishing for some special Requirements. SP-1 MONO
  • Able to handle temperature up to 80 C
  • Trolley mounted available.
  • Also available with 120 Volt / 60 Hz.
  • Custom built pumps available.

Applications:


  • All clear liquids without solid suspensions like diesel, petrol, lpg, oil, solvents, syrup, dm water, chemicals, steam boiler feeding, evacuation of condensate water, boosting of pressure, as a drum/barrel pump

Self Priming Centrifugal Pump

₹ 14000/Unit Get Latest Price

Product Brochure
HeadMax 40Mtr
Max Flow RateMax 50LPM
BrandMalhar
ModelSP3

Minimum order quantity: 1 Unit

Self Priming Pump which are ideal for use in different hosehold , commercial and agricultural applications


Features:


  • All wetted parts of pumps are made from lost wax process (investment casting), so excellent surface finish. smooth flow path/ hydraulic passage and no casting defects like blow holes, cracks etc.
  • Centripetal / regenerative impeller for better suction.

    Specifications:


    • Pumps will be normally available in CF-8m /CF-8 (Gun metal, Alloy-20) and also in other material as fee customer's requirements.
    • Single /multistage pumps to handle crystal cleat liquids for high pressure duties.
    • Very quick priming, no need of foot valves.
    • Very high suction capacity up to 8 meters without much noise
    • Various types of sealing arrangements as per customer's liquid characteristics.
    • Normally fitted with carbon/ceramic seal faces with teflon cup and viton rubber,
    • Pumps are available in monobloc and in bare type also with flameproof motor.
    • All motors are of "TCFC" type
    • Pump can be offered with electro polishing for some special Requirements. SP-1 MONO
    • Able to handle temperature up to 80 C
    • Trolley mounted available.
    • Also available with 120 Volt / 60 Hz.
    • Custom built pumps available.

      Applications:


      • All clear liquids without solid suspensions like diesel, petrol, lpg, oil, solvents, syrup, dm water, chemicals, steam boiler feeding, evacuation of condensate water, boosting of pressure, as a drum/barrel pump

      Stainless Steel Self Priming Centrifugal Monoblock Pump

      ₹ 18000/Unit Get Latest Price

      Product Brochure
      Head72 Meter
      Motor PhaseSingle Phase, Three Phase
      Power SourceElectric
      Motor Horsepower0.5 HP, 1 HP, 2 HP, 3 HP, 5 HP, 6.5 HP, 8 HP
      Material of ConstructionCast Iron, Stainless steel
      BrandMalhar
      ModelCFSP 3
      Max Flow Rate30 LPM to 600 LPM

      Minimum order quantity: 1 Unit

      We are the leading and prominent Manufacturer, Exporter and Trader of Stainless Steel Self Priming Centrifugal Monoblock Pump.

      APPLICATION:-

      • Milk, Cream, Butter Milk Condensed Milk
      • Fruit Juice, Sugar Syrup
      • Vitamin Solutions, Sugar & Confectionery.
      • R 0 Water, DM Water, Pure Water. Water for Injection (WFI)
      • Vegetable Oil, Mineral Oil, Lub Oil etc.
      • Pharmaceutical Formulations, Syrup etc.
      • Alkaline Solution / Alcoholic Drinks.
      • Acids, Fine Chemicals
      • Bottling Plants, Soft Drinks & Distillery
      • Food Processing / Liquid Food Stuffs
      • Colour dyes and Pigments / Paints
      • Descaling Applications, Paper & Cement Industries
      • Water Treatment Plants
      • Detergent, Soaps, Paste & Shampoo
      • Textile Sizing, Dyeing & Finishing Systems
      • Natural Cellulose Fiber / Synthetic Fiber System
      • Hot & Cold Water Pumping.

      Self Priming Centrifugal Mud Bare Shaft Pump

      • Foil Print

      ₹ 12000/Unit Get Latest Price

      Product Brochure
      Usage/ApplicationIndustrial
      MaterialMild Steel
      BrandMALHAR
      ColorGrey
      Country of OriginMade in India

      Minimum order quantity: 1 Unit

      Special features:-

      • Excellent quick automatic action without foot valve up to 8 mtrs.
      • Automatic air release during priming.
      • Back pull out design, so easy maintenance without disturbing pipe lines.
      • Dynamically balanced rotating parts ensure less vibrations.
      • Better efficiency because of good hydraulic design.
      • Minimum parts, fast repairing at low cost, also pump is available at economical rate.
      • Available in bare, coupled, monoblock, belt driven & engine driven version.
      • Also offered pump with trolley / trailer to move it from one place to another.
      • Monoblock pumps can be able to with stand with wide voltage fluctuations.
      • Less expensive & easily available spares.
      • Pumps can be fitted with mechanical seal as per customer's requirements.
      • Very simple construction, only two moving parts.
      • Easy inspection of impeller.
      • Large diameter solids handled. Up to 60 mm

      For pumping clear / turbid water / chemicals & volatile liquids.Air conditional plants , power station , mine drainage ,sprinkle systems fire fighting , booster service , oils brine. For pumping clear / turbid water / chemicals & volatile liquids.Air conditional plants , power station , mine drainage ,sprinkle systems fire fighting , booster service , oils brine.

      X

      Contact Us

      Gaurang Shah (Proprietor)
      Creative Engineers
      4317, BEHIND TECHNO INDUSTRIES, PHASE-4, FOR U ROAD, VATVA GIDC
      Ahmedabad - 380028, Gujarat, India

      Get Directions
      Send Email
      Share:
      Thank youYour Enquiry has been sent successfully.